Http://www.AFTvision.com
Ⅰ、AFT software introduce
Welcome to the MV professional image processing software, image analysis for workers in creating a wide range of functions of the working environment, so that people can easily take on the image processing, measurement and analysis
 button, single-click on the button, then click the selected region alone can cut this region.
 "Zoom" button. Every single click once, then zoom in on the basis of Relevant doubled.
 The current ratio of amplification can also be directly selected magnification
 "Narrow" button, single-click each time, on the basis of narrowing in Phase 1 / 2. "
 Show full size" button. 
From left to right field followed by measurement tools, measuring amend the Toolbar, tagging Toolbar.
Will use every tool in the context of January 1 after that.
The status bar, then shows the picture of the dimensions of the number of pixels respectively, mouse and the coordinates of the points of the points of R, G, B three-color value.
Ⅱ、the image format
A support of the image data format of eight and 24-bit color images.
B after the value of the image is actually only 0 and 255 of the eight images, the value of the image format is the trick behind the morphology of particles and image formats, an image of the image format does not support.
Ⅲ、Measurement Tools
1、 click tools that the left mouse button click OK.
2、
 line the left mouse button click twice determine a line, right-click Cancel.
3、 straight-line click the left mouse button twice determine a line, right-click Cancel.
4、
 2points round the left mouse button click twice, through the designation of central and determine the radius circle, right-been cancelled.
5、 three points three times round the left mouse button click, through the designated circle on the three identified yen (3:00 uniform, with a round of high precision), right-click Cancel.
6、 Arc the left mouse button click three times. Left-click the first round starting point, left-click end of the second round, left-click on the third point arc. Right-click Cancel.
7、 5 points rectangular click the left mouse button identified five rectangular, left the first left-click the second time the first set of rectangular side, left-click III, IV and V are the edge of the other three , Right-click Cancel.
8、 more than several times in the deformation of the mouse click, right-click + SHIFT more deformation closed, right-click Cancel. Polygon area measuring only measurement convex polygon, concave polygon area of the current measurement can not be completed. Can also measure the perimeter.
9、 three points elliptical mouse click in the third, were identified center, the long axis, the short axis, right-click Cancel.
10、
 character tools, click the mouse twice identified tagging region, determine the location marked, right-click Cancel, the image on eBay.
Ⅳ、 测量修改工具
1、 middle-line mouse respectively click select the angle between the two side (can be on both sides of the line, straight edge and rectangular), the third click OK middle-line position. Right-click Cancel.
2、 vertical lines need to click the left mouse button twice, first click to select segment, linear or rectangular side, the second click OK vertical position, right-click Cancel.
3、 parallel lines need to click the left mouse button twice, first click to select segment, linear or rectangular side, the second click OK parallel line position, right-click Cancel.
4、 Tangent on a round on the need to click the left mouse button twice, click to select the first round, second click OK tangent position, right-click Cancel.
5、 Outside the circle tangent need to click the left mouse button three times, click to select the first endpoint (left + shift directly click OK at the location), click to select the second round, the third click OK tangent position. Note: endpoint that has produced graphics endpoint, including segments of the endpoint, the mid-point line, center, an oval of the long axis points short axis, rectangular endpoint, the midpoint of rectangular edge.
6、 to delete points need to click the mouse once, delete the selected graphic.
Ⅴ、Marking tools
1、 the distance between two points need to click the left mouse button three times, first, second click to select the two graphics endpoint, (left + SHIFT directly identified), marking the third time determine the location of measurement, right-click Cancel.
2、 the vertical line distance need to click the mouse three times, click to select the first image endpoint (+ SHIFT directly identified), click to select the second line, third click OK measuring mark the location, right-click Cancel.
3、  obliquity need to click the left mouse button three times, first, second click to select the two line graphics, the third click OK or Dunjiao acute angle and mark the location of measurement. Right-click Cancel.
4、  the diameter of the left mouse button click to be secondary. The first click to select circle or arc, the second click OK measuring mark the location, right-click Cancel.
5、 radius need to click the left mouse button twice, first click to select circle or arc, the second click OK mark the location of measurement. Right-click Cancel.
6、 Arc Angle click the left mouse button to be secondary, click to select the first round, second click determine the location of measurement, right-click Cancel.
7、 elliptical length or short-shaft of the left mouse button click to be secondary, click to select the first oval, the second click OK or long axis measuring short axis, right-click Cancel.
8、  area measurement need to click the left mouse button twice, first click to select the arbitrary closure graphics border, the second click determine the location of measurement. Right-click Cancel.
9、  measurement editing tools need to click the left mouse button once, select the measurement results, modify the measurement results
Notes: The measurement results in the mouse around with the arrow graphics, will automatically be prompted to select.
Ⅵ、 Image mode
Below on the software menu of "image mode" to do a simple description:
 
histogram 8 histogram image display brightness histogram, 24 image display brightness and three-channel RGB histogram
The Threshhold the eight gray image will be converted to eight monochrome images, eight monochrome images 0 and 255, only two colors, for behind the morphology and the use of particle analysis.
 
|
Graphic switch, show or hide graphics, default is displayed. 
Image switch, show or hide the image, is shown by default. 
Tailoring the scope of selection, the feature is back and supporting the use of the crop. The scope of selection, tool selection by dragging the control point (around) to adjust the selection. In the selection hold down the left mouse button, can move the selection. Select the image of the need to use the "Crop" feature.
